{"product_id":"w5100-ethernet-shield-for-arduino-main-board-uno-r3-atmega-328","title":"W5100 Ethernet Shield For Arduino Main Board UNO R3 ATMega 328","description":"\u003cb\u003eW5100 Ethernet Shield For Arduino Main Board UNO R3 ATMega 328 MEGA2560\u003c\/b\u003e\u003cbr\u003e\n\n The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100ethernet chip . The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top. \u003cbr\u003e\u003cbr\u003e\n\n\n    The Ethernet Shield has a standard RJ-45 connection, with an integrated line transformer and Power over Ethernet enabled. \u003cbr\u003e\u003cbr\u003e\n\nThere is an onboard micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino, Crowduino and Mega (using the Ethernet library). The onboard microSD card reader is accessible through the SD Library. When working with this library, SS is on Pin 4. \u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eSpecification \u003c\/b\u003e\u003cbr\u003e\nOperating voltage 5V (supplied from the Arduino Board) \u003cbr\u003e\nEthernet Controller: W5100 with internal 16K buffer \u003cbr\u003e\nConnection speed: 10\/100Mb \u003cbr\u003e\nConnection with Arduino on SPI port \u003cbr\u003e\nThe Shield  contains a number of informational LEDs \u003cbr\u003e\nPWR: indicates that the board and shield are powered \u003cbr\u003e\nLINK: indicates the presence of a network link and flashes when the shield transmits or receives data \u003cbr\u003e\nFULLD: indicates that the network connection is full duplex \u003cbr\u003e\n100M: indicates the presence of a 100 Mb\/s network connection (as opposed to 10 Mb\/s) \u003cbr\u003e\nRX: flashes when the shield receives data \u003cbr\u003e\nTX: flashes when the shield sends data \u003cbr\u003e\nTX: flashes when the shield sends data \u003cbr\u003e\nCOLL: flashes when network collisions are detected \u003cbr\u003e\u003cbr\u003e\n\u003cb\u003eSample code:\u003c\/b\u003e\u003cbr\u003e\n\n\/ *\n* Web Server\n*\n* A simple web server that shows the value of the analog input pins.\n* \/\n\n#include\n\nbyte mac [] = {0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED};\nbyte ip [] = {192, 168, 0, 15};\n\nServer server (80);\n\nvoid setup ()\n{\nEthernet.begin (mac, ip);\nserver.begin ();\n}\n\nvoid loop ()\n{\nClient client = server.available ();\nif (client) {\n\/\/ An http request ends with a blank line\nboolean current_line_is_blank = true;\nwhile (client.connected ()) {\nif (client.available ()) {\nchar c = client.read ();\n\/\/ If we've gotten to the end of the line (received a newline\n\/\/ Character) and the line is blank, the http request has ended,\n\/\/ So we can send a reply\nif (c == ' n' \u0026amp;\u0026amp; current_line_is_blank) {\n\/\/ Send a standard http response header\nclient.println ( \"HTTP \/ 1.1 200 OK\");\nclient.println ( \"Content-Type: text \/ html\");\nclient.println ();\n         \n\/\/ Output the value of each analog input pin\nclient.print ( \"welcome to tinyos\");\nclient.println ( \"\n\");\nclient.print ( \"\/\/ *************************************\");\nclient.println ( \"\n\");\nclient.print (www.tinyos.net.cn);\nclient.println ( \"\n\");\nclient.print ( \"\/\/ *************************************\");\nclient.println ( \"\n\");\nfor (int i = 0; i \nclient.print ( \"analog input\");\nclient.print (i);\nclient.print ( \"is\");\nclient.print (analogRead (i));\nclient.println ( \"\n\");\n}\nbreak;\n}\nif (c == ' n') {\n\/\/ We're starting a new line\ncurrent_line_is_blank = true;\n} Else if (c! = ' R') {\n\/\/ We've gotten a character on the current line\ncurrent_line_is_blank = false;\n}\n}\n}\nclient.stop ();\n}\n}","brand":"Canada Cable Shop","offers":[{"title":"Default Title","offer_id":51779005907000,"sku":"CCS-3184","price":29.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1177\/2598\/6872\/files\/W5100_Ethernet_Shield_For_Arduino_UNO_R3.jpg?v=1785537497","url":"https:\/\/www.canadacableshop.ca\/products\/w5100-ethernet-shield-for-arduino-main-board-uno-r3-atmega-328","provider":"Canada Cable Shop","version":"1.0","type":"link"}